Açıklama

ZKLF60145-2RS-XL Teknik Özellikleri

Orijinal Schaeffler (FAG/INA) üretimi ZKLF60145-2RS-XL kodlu Axial Eğik Bilyalı Rulman, endüstriyel uygulamalarda güvenilir performans ve uzun ömür sunar. Teknik detaylar ve ölçüler aşağıdaki tabloda yer almaktadır.

ZKLF60145-2RS-XL Axial Eğik Bilyalı Rulman Teknik Özellikleri Tablosu Özellik Değer Ağırlık 3.989 kg Axial runout 3 µm Dinamik Yük Sayısı (Eksenel) (C) 93000 N Statik Yük Sayısı (Eksenel) (C) 214000 N İç Çap (d) 60 mm Bore diameter lower tolerance -0.008 mm Bore diameter upper tolerance 0 mm Connection thread for lubrication M6 Contact angle (a) 60 ° Distance of extraction slot (I) 35 mm Fatigue load limit, axial (C) 13000 N Fixing holes diameter (d) 8.8 mm Mass moment of inertia (M) 13.7 kg*cm2 Maximum diameter of housing (D) 100 mm Minimum Pah Boyutu (r) 0.6 mm Minimum Pah Boyutu (r) 0.6 mm Minimum diameter shaft (d) 82 mm Number of holes in adjacent construction (n) 8 Dış Çap (D) 145 mm Outside diameter lower tolerance -0.015 mm Outside diameter upper tolerance 0 mm Pitch circle diameter fixing holes (J) 120 mm Pitch quantity of fixing holes (n) 8 Pitch separation angle of holes in adjacent construction (t) 45 ° Pitch separation angle of fixing holes (t) 45 ° Position tolerance of bore in the housing (t) 0.2 mm Recommended INA precision locknut for axial locking AM60 Recommended INA precision locknut for radial locking ZMA60/98 Required locknut force axial 16700 N İç Bilezik Fatura Çapı (d) 85 mm Rigidity axial (c) 1300 N/µm Size of fixing screws M8 Maksimum Çalışma Sıcaklığı (T) 120 °C Minimum Çalışma Sıcaklığı (T) -30 °C Tightening torque for the recommended INA precision locknut (M) 100 Nm Tilting rigidity (c) 1650 Nm/mrad Genişlik (B) 45 mm Width lower tolerance -0.25 mm Width of extraction slot (b) 3 mm Width upper tolerance 0 mm