Açıklama

ZKLF100230-2Z Teknik Özellikleri

Orijinal Schaeffler (FAG/INA) üretimi ZKLF100230-2Z kodlu Axial Eğik Bilyalı Rulman, endüstriyel uygulamalarda güvenilir performans ve uzun ömür sunar. Teknik detaylar ve ölçüler aşağıdaki tabloda yer almaktadır.

ZKLF100230-2Z Axial Eğik Bilyalı Rulman Teknik Özellikleri Tablosu Özellik Değer Ağırlık 17.605 kg Axial runout 3 µm Dinamik Yük Sayısı (Eksenel) (C) 295000 N Statik Yük Sayısı (Eksenel) (C) 790000 N Bearing frictional torque (M) 3 Nm İç Çap (d) 100 mm Bore diameter lower tolerance -0.008 mm Bore diameter upper tolerance 0 mm Connection thread for lubrication M6 Contact angle (a) 60 ° Distance of extraction slot (I) 73 mm Fatigue load limit, axial (C) 30000 N Fixing holes diameter (d) 14 mm Limiting speed for grease lubrication (n) 2900 1/min Mass moment of inertia (M) 185 kg*cm2 Maximum diameter of housing (D) 175 mm Minimum Pah Boyutu (r) 0.6 mm Minimum Pah Boyutu (r) 0.6 mm Minimum diameter shaft (d) 130 mm Number of holes in adjacent construction (n) 12 Dış Çap (D) 230 mm Outside diameter lower tolerance -0.015 mm Outside diameter upper tolerance 0 mm Pitch circle diameter fixing holes (J) 200 mm Pitch quantity of fixing holes (n) 12 Pitch separation angle of holes in adjacent construction (t) 30 ° Pitch separation angle of fixing holes (t) 30 ° Position tolerance of bore in the housing (t) 0.4 mm Recommended INA precision locknut for axial locking AM100 Required locknut force axial 52000 N İç Bilezik Fatura Çapı (d) 146 mm Rigidity axial (c) 2450 N/µm Size of fixing screws M12 Maksimum Çalışma Sıcaklığı (T) 120 °C Minimum Çalışma Sıcaklığı (T) -30 °C Thermally safe operating speed (n) 2000 1/min Tightening torque for the recommended INA precision locknut (M) 500 Nm Tilting rigidity (c) 8200 Nm/mrad Genişlik (B) 85 mm Width lower tolerance -0.25 mm Width of extraction slot (b) 3 mm Width upper tolerance 0 mm