Açıklama

ZKLF100200-2Z-XL Teknik Özellikleri

Orijinal Schaeffler (FAG/INA) üretimi ZKLF100200-2Z-XL kodlu Axial Eğik Bilyalı Rulman, endüstriyel uygulamalarda güvenilir performans ve uzun ömür sunar. Teknik detaylar ve ölçüler aşağıdaki tabloda yer almaktadır.

ZKLF100200-2Z-XL Axial Eğik Bilyalı Rulman Teknik Özellikleri Tablosu Özellik Değer Ağırlık 8.372 kg Axial runout 3 µm Dinamik Yük Sayısı (Eksenel) (C) 154000 N Statik Yük Sayısı (Eksenel) (C) 435000 N Bearing frictional torque (M) 2.6 Nm İç Çap (d) 100 mm Bore diameter lower tolerance -0.008 mm Bore diameter upper tolerance 0 mm Connection thread for lubrication M6 Contact angle (a) 60 ° Distance of extraction slot (I) 45 mm Fatigue load limit, axial (C) 23000 N Fixing holes diameter (d) 11 mm Limiting speed for grease lubrication (n) 3300 1/min Mass moment of inertia (M) 85.3 kg*cm2 Maximum diameter of housing (D) 150 mm Minimum Pah Boyutu (r) 0.6 mm Minimum Pah Boyutu (r) 0.6 mm Minimum diameter shaft (d) 128 mm Number of holes in adjacent construction (n) 8 Dış Çap (D) 200 mm Outside diameter lower tolerance -0.015 mm Outside diameter upper tolerance 0 mm Pitch circle diameter fixing holes (J) 175 mm Pitch quantity of fixing holes (n) 8 Pitch separation angle of holes in adjacent construction (t) 45 ° Pitch separation angle of fixing holes (t) 45 ° Position tolerance of bore in the housing (t) 0.2 mm Recommended INA precision locknut for axial locking AM100 Recommended INA precision locknut for radial locking ZMA100/140 Required locknut force axial 25624 N İç Bilezik Fatura Çapı (d) 132 mm Rigidity axial (c) 1900 N/µm Size of fixing screws M10 Maksimum Çalışma Sıcaklığı (T) 120 °C Minimum Çalışma Sıcaklığı (T) -30 °C Thermally safe operating speed (n) 2150 1/min Tightening torque for the recommended INA precision locknut (M) 250 Nm Tilting rigidity (c) 5800 Nm/mrad Genişlik (B) 55 mm Width lower tolerance -0.25 mm Width of extraction slot (b) 3 mm Width upper tolerance 0 mm