Açıklama

ZKLDF395 Teknik Özellikleri

Orijinal Schaeffler (FAG/INA) üretimi ZKLDF395 kodlu Axial Eğik Bilyalı Rulman, endüstriyel uygulamalarda güvenilir performans ve uzun ömür sunar. Teknik detaylar ve ölçüler aşağıdaki tabloda yer almaktadır.

ZKLDF395 Axial Eğik Bilyalı Rulman Teknik Özellikleri Tablosu Özellik Değer Ağırlık 32.4 kg Axial rigidity of rolling element set (c) 6300 N/µm Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. (t) 6 µm Axial rigidity of bearing position (c) 4500 N/µm Dinamik Yük Sayısı (Eksenel) (C) 241000 N Statik Yük Sayısı (Eksenel) (C) 1580000 N İç Çap (d) 395 mm Bore diameter lower tolerance -0.023 mm Bore diameter upper tolerance 0 mm Counterbore depth of fixing holes (a) 8.2 mm Counterbore diameter of fixing holes (d) 15 mm Fatigue load limit, axial (C) 34000 N Fixing holes diameter inner ring (d) 9.3 mm Fixing holes diameter outer ring (d) 9.3 mm Flange diameter (D) 525 mm Flange diameter lower tolerance -0.028 mm Flange diameter upper tolerance 0 mm Height contact face outerring H1 lower tolerance -0.2 mm Height contact face outer ring (H) 42.5 mm Height contact face outerring H1 upper tolerance 0.2 mm Yükseklik (H) 65 mm Limit Hız (n) 1600 1/min Outside diameter D1 (D) 486 mm Outside diameter D3 (D) 488 mm Pitch quantity (n) 48 Pitch separation angle (t) 7.5 ° Pitch circle diameter fixing holes in inner ring (J) 415 mm Pitch circle diameter fixing holes in outer ring (J) 505 mm Quantity of fixing holes inner ring 46 Quantity of fixing holes outer ring 45 Quantity of retaining screws 2 Quantity of threaded extraction hole 3 Radial rigidity of rolling element set (c) 900 N/µm Radial rigidity of bearing position (c) 900 N/µm İç Bilezik Fatura Çapı (D) 450 mm Screw tightening torque (M) 34 Nm Maksimum Çalışma Sıcaklığı (T) 120 °C Minimum Çalışma Sıcaklığı (T) -30 °C Threaded extraction hole (G) M12 Tilting rigidity of rolling element set (c) 148000 Nm/mrad Tilting rigidity of bearing position (c) 100000 Nm/mrad