Açıklama

ZKLDF260 Teknik Özellikleri

Orijinal Schaeffler (FAG/INA) üretimi ZKLDF260 kodlu Axial Eğik Bilyalı Rulman, endüstriyel uygulamalarda güvenilir performans ve uzun ömür sunar. Teknik detaylar ve ölçüler aşağıdaki tabloda yer almaktadır.

ZKLDF260 Axial Eğik Bilyalı Rulman Teknik Özellikleri Tablosu Özellik Değer Ağırlık 18.4 kg Axial rigidity of rolling element set (c) 4700 N/µm Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. (t) 6 µm Axial rigidity of bearing position (c) 3200 N/µm Dinamik Yük Sayısı (Eksenel) (C) 162000 N Statik Yük Sayısı (Eksenel) (C) 920000 N İç Çap (d) 260 mm Bore diameter lower tolerance -0.018 mm Bore diameter upper tolerance 0 mm Counterbore depth of fixing holes (a) 8.2 mm Counterbore diameter of fixing holes (d) 15 mm Fatigue load limit, axial (C) 23800 N Fixing holes diameter inner ring (d) 9.3 mm Fixing holes diameter outer ring (d) 9.3 mm Flange diameter (D) 385 mm Flange diameter lower tolerance -0.02 mm Flange diameter upper tolerance 0 mm Height contact face outerring H1 lower tolerance -0.2 mm Height contact face outer ring (H) 36.5 mm Height contact face outerring H1 upper tolerance 0.2 mm Yükseklik (H) 55 mm Limit Hız (n) 2400 1/min Outside diameter D1 (D) 345 mm Outside diameter D3 (D) 348 mm Pitch quantity (n) 36 Pitch separation angle (t) 10 ° Pitch circle diameter fixing holes in inner ring (J) 280 mm Pitch circle diameter fixing holes in outer ring (J) 365 mm Quantity of fixing holes inner ring 34 Quantity of fixing holes outer ring 33 Quantity of retaining screws 2 Quantity of threaded extraction hole 3 Radial rigidity of rolling element set (c) 700 N/µm Radial rigidity of bearing position (c) 700 N/µm İç Bilezik Fatura Çapı (D) 313 mm Screw tightening torque (M) 34 Nm Maksimum Çalışma Sıcaklığı (T) 120 °C Minimum Çalışma Sıcaklığı (T) -30 °C Threaded extraction hole (G) M12 Tilting rigidity of rolling element set (c) 54000 Nm/mrad Tilting rigidity of bearing position (c) 40000 Nm/mrad