Açıklama

ZKLDF120 Teknik Özellikleri

Orijinal Schaeffler (FAG/INA) üretimi ZKLDF120 kodlu Axial Eğik Bilyalı Rulman, endüstriyel uygulamalarda güvenilir performans ve uzun ömür sunar. Teknik detaylar ve ölçüler aşağıdaki tabloda yer almaktadır.

ZKLDF120 Axial Eğik Bilyalı Rulman Teknik Özellikleri Tablosu Özellik Değer Ağırlık 4.81 kg Axial rigidity of rolling element set (c) 2500 N/µm Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. (t) 3 µm Axial rigidity of bearing position (c) 1500 N/µm Dinamik Yük Sayısı (Eksenel) (C) 76000 N Statik Yük Sayısı (Eksenel) (C) 315000 N İç Çap (d) 120 mm Bore diameter lower tolerance -0.01 mm Bore diameter upper tolerance 0 mm Counterbore depth of fixing holes (a) 6.2 mm Counterbore diameter of fixing holes (d) 11 mm Fatigue load limit, axial (C) 11500 N Fixing holes diameter inner ring (d) 7 mm Fixing holes diameter outer ring (d) 7 mm Flange diameter (D) 210 mm Flange diameter lower tolerance -0.015 mm Flange diameter upper tolerance 0 mm Height contact face outerring H1 lower tolerance -0.175 mm Height contact face outer ring (H) 26 mm Height contact face outerring H1 upper tolerance 0.175 mm Yükseklik (H) 40 mm Limit Hız (n) 4300 1/min Outside diameter D1 (D) 185 mm Outside diameter D3 (D) 181 mm Pitch quantity (n) 24 Pitch separation angle (t) 15 ° Pitch circle diameter fixing holes in inner ring (J) 135 mm Pitch circle diameter fixing holes in outer ring (J) 195 mm Quantity of fixing holes inner ring 22 Quantity of fixing holes outer ring 21 Quantity of retaining screws 2 Quantity of threaded extraction hole 3 Radial rigidity of rolling element set (c) 400 N/µm Radial rigidity of bearing position (c) 400 N/µm İç Bilezik Fatura Çapı (D) 159 mm Screw tightening torque (M) 14 Nm Maksimum Çalışma Sıcaklığı (T) 120 °C Minimum Çalışma Sıcaklığı (T) -30 °C Threaded extraction hole (G) M8 Tilting rigidity of rolling element set (c) 8000 Nm/mrad Tilting rigidity of bearing position (c) 5500 Nm/mrad