Açıklama

YRTC850-XL Teknik Özellikleri

Orijinal Schaeffler (FAG/INA) üretimi YRTC850-XL kodlu Axial/radial roller beaBilezik, endüstriyel uygulamalarda güvenilir performans ve uzun ömür sunar. Teknik detaylar ve ölçüler aşağıdaki tabloda yer almaktadır.

YRTC850-XL Axial/radial roller beaBilezik Teknik Özellikleri Tablosu Özellik Değer Ağırlık 231.4 kg Axial rigidity of rolling element set (c) 61900 N/µm Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. (t) 12 µm Axial rigidity of bearing position (c) 53000 N/µm Dinamik Yük Sayısı (Eksenel) (C) 1020000 N Dinamik Yük Sayısı (Radyal) (C) 520000 N Statik Yük Sayısı (Radyal) (C) 1690000 N Statik Yük Sayısı (Eksenel) (C) 8500000 N Bearing friction torque at 5 1/min (M) 130 Nm İç Çap (d) 850 mm Bore diameter lower tolerance -0.05 mm Bore diameter upper tolerance 0 mm Counterbore depth of fixing holes (a) 17 mm Counterbore diameter of fixing holes (d) 26 mm Fixing holes diameter inner ring (d) 18 mm Fixing holes diameter outer ring (d) 18 mm Height contact face outerring H1 lower tolerance -0.3 mm Height contact face outer ring (H) 80.5 mm Height contact face outerring H1 upper tolerance 0.3 mm Height contact face outerring H2 lower tolerance -0.3 mm Height contact face outer ring (H) 43.5 mm Height contact face outerring H2 upper tolerance 0.3 mm Yükseklik (H) 124 mm Limit Hız (n) 50 1/min Maximum diameter inner ring (D) 1018 mm Dış Çap (D) 1095 mm Outside diameter lower tolerance -0.063 mm Outside diameter upper tolerance 0 mm Pitch quantity (n) 60 Pitch separation angle (t) 6 ° Pitch circle diameter fixing holes in inner ring (J) 890 mm Pitch circle diameter fixing holes in outer ring (J) 1055 mm Quantity of fixing holes inner ring 58 Quantity of fixing holes outer ring 54 Quantity of retaining screws 2 Quantity of threaded extraction hole 6 Radial rigidity of rolling element set (c) 12000 N/µm Radial rigidity of bearing position (c) 16700 N/µm Screw tightening torque (M) 284 Nm Maksimum Çalışma Sıcaklığı (T) 120 °C Minimum Çalışma Sıcaklığı (T) -30 °C Threaded extraction hole (G) M16 Tilting rigidity of rolling element set (c) 6772000 Nm/mrad Tilting rigidity of bearing position (c) 3762000 Nm/mrad Width of outer ring (C) 37 mm