Açıklama

SX011848-A Teknik Özellikleri

Orijinal Schaeffler (FAG/INA) üretimi SX011848-A kodlu Crossed roller beaBilezik, endüstriyel uygulamalarda güvenilir performans ve uzun ömür sunar. Teknik detaylar ve ölçüler aşağıdaki tabloda yer almaktadır.

SX011848-A Crossed roller beaBilezik Teknik Özellikleri Tablosu Özellik Değer Ağırlık 4.965 kg Running accuracy, axial 0.01 mm Dinamik Yük Sayısı (Eksenel) (C) 149000 N Dinamik Yük Sayısı (Radyal) (C) 106000 N Statik Yük Sayısı (Radyal) (C) 295000 N Statik Yük Sayısı (Eksenel) (C) 600000 N Dimensions identical to ISO dimension series 18 61848 Bore Diameter (d) 240 mm Inner diameter outer ring (D) 270.8 mm Bore diameter lower tolerance -0.024 mm Bore diameter upper tolerance 0.005 mm Rolling element pitch circle diameter (D) 270 mm Diameter of lubrication hole (S) 2 mm Yükseklik (H) 28 mm Height inner ring (h) 28 mm Height of individual ring (h) 28 mm Height of individual ring lower tolerance -0.025 mm Height of individual ring upper tolerance 0 mm Limiting speed for grease lubrication with normal clearance (N) 280 1/min Limiting speed for grease lubrication with preload (N) 140 1/min Limiting speed for oil lubrication with normal clearance (N) 565 1/min Limiting speed for oil lubrication with preload (N) 280 1/min Outer diameter inner ring (d) 269.2 mm Maximum axial tilting clearance, at standard bearing clearance (S) 0.06 mm Maximum radial bearing clearance, at standard bearing clearance (S) 0.03 mm Low clearance: Preload (RLO) 0.01 mm Low clearance: Radial clearance (RLO) 0.005 mm Maximum bearing preload (VSP) 0.025 mm Minimum axial tilting clearance, at standard bearing clearance (S) 0.02 mm Minimum radial bearing clearance, at standard bearing clearance (S) 0.01 mm Minimum Pah Boyutu (r) 2 mm Min. bearing preload (VSP) 0.005 mm Outside Diameter (D) 300 mm Outside diameter lower tolerance -0.032 mm Outside diameter upper tolerance 0 mm Running accuracy, radial 0.02 mm Maksimum Çalışma Sıcaklığı (T) 80 °C Minimum Çalışma Sıcaklığı (T) -30 °C Width lower tolerance -0.1 mm Width upper tolerance 0.1 mm