Açıklama

ZKLF1255-2RS-2AP-XL Teknik Özellikleri

Orijinal Schaeffler (FAG/INA) üretimi ZKLF1255-2RS-2AP-XL kodlu Axial Eğik Bilyalı Rulman, endüstriyel uygulamalarda güvenilir performans ve uzun ömür sunar. Teknik detaylar ve ölçüler aşağıdaki tabloda yer almaktadır.

ZKLF1255-2RS-2AP-XL Axial Eğik Bilyalı Rulman Teknik Özellikleri Tablosu Özellik Değer Ağırlık 0.74 kg Axial runout 2 µm Dinamik Yük Sayısı (Eksenel) (C) 30500 N Statik Yük Sayısı (Eksenel) (C) 50000 N Bearing frictional torque (M) 0.24 Nm İç Çap (d) 12 mm Bore diameter lower tolerance -0.005 mm Bore diameter upper tolerance 0 mm Connection thread for lubrication M6 Contact angle (a) 60 ° Distance of extraction slot (I) 17 mm Fatigue load limit, axial (C) 3050 N Fixing holes diameter (d) 6.8 mm Limiting speed for grease lubrication (n) 9200 1/min Maximum diameter of housing (D) 33 mm Minimum Pah Boyutu (r) 0.6 mm Minimum Pah Boyutu (r) 0.3 mm Minimum diameter shaft (d) 16 mm Number of holes in adjacent construction (n) 5 Dış Çap (D) 55 mm Outside diameter lower tolerance -0.01 mm Outside diameter upper tolerance 0 mm Pitch circle diameter fixing holes (J) 42 mm Pitch quantity of fixing holes (n) 5 Pitch separation angle of holes in adjacent construction (t) 60 ° Pitch separation angle of fixing holes (t) 60 ° Position tolerance of bore in the housing (t) 0.1 mm Recommended INA precision locknut for radial locking ZM12 Required locknut force axial 5307 N İç Bilezik Fatura Çapı (d) 25 mm Rigidity axial (c) 650 N/µm Size of fixing screws M6 Maksimum Çalışma Sıcaklığı (T) 120 °C Minimum Çalışma Sıcaklığı (T) -30 °C Thermally safe operating speed (n) 3800 1/min Tightening torque for the recommended INA precision locknut (M) 8 Nm Tilting rigidity (c) 100 Nm/mrad Genişlik (B) 50 mm Width lower tolerance -0.5 mm Width of extraction slot (b) 3 mm Width upper tolerance 0 mm