Orijinal Schaeffler FAG/INA ürünü. YRTSMA260 Axial/radial roller beaBilezik. Endüstriyel kalite, hassas ölçüler.
Orijinal Schaeffler (FAG/INA) üretimi YRTSMA260 kodlu Axial/radial roller beaBilezik, endüstriyel uygulamalarda güvenilir performans ve uzun ömür sunar. Teknik detaylar ve ölçüler aşağıdaki tabloda yer almaktadır.
   |
|
| Ağırlık | 18.7 kg |
|---|---|
| Ağırlık | 18.7 kg |
| Counterbore depth of fixing holes (a) | 8.2 mm |
| Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. (t) | 6 µm |
| Axial rigidity of bearing position (c) | 9700 N/µm |
| Dinamik Yük Sayısı (Eksenel) (C) | 173000 N |
| Dinamik Yük Sayısı (Radyal) (C) | 110000 N |
| Statik Yük Sayısı (Radyal) (C) | 305000 N |
| Statik Yük Sayısı (Eksenel) (C) | 1050000 N |
| İç Çap (d) | 260 mm |
| Bore diameter lower tolerance | -0.018 mm |
| Mass moment of inertia for rotating inner ring (M) | 2074 kg*cm2 |
| Axial rigidity of rolling element set (c) | 16800 N/µm |
| Counterbore diameter of fixing holes (d) | 15 mm |
| Fixing holes diameter inner ring (d) | 9.3 mm |
| Fixing holes diameter outer ring (d) | 9.3 mm |
| Height contact face outerring H1 lower tolerance | -0.07 mm |
| Height contact face outer ring (H) | 21 mm |
| Height contact face outerring H1 upper tolerance | 0.05 mm |
| Yükseklik (H) | 57.5 mm |
| Limit Hız (n) | 910 1/min |
| Bore diameter upper tolerance | 0 mm |
| Mass moment of inertia for rotating outer ring (M) | 1422 kg*cm2 |
| Quantity of retaining screws | 2 |
| Quantity of threaded extraction hole | 3 |
| Outside diameter lower tolerance | -0.02 mm |
| Outside diameter upper tolerance | 0 mm |
| Pitch quantity (n) | 36 |
| Pitch separation angle (t) | 10 ° |
| Pitch circle diameter fixing holes in inner ring (J) | 280 mm |
| Pitch circle diameter fixing holes in outer ring (J) | 365 mm |
| Quantity of fixing holes inner ring | 34 |
| Quantity of fixing holes outer ring | 33 |
| Maximum diameter inner ring (D) | 347 mm |
| Dış Çap (D) | 385 mm |
| Radial rigidity of rolling element set (c) | 5800 N/µm |
| Radial rigidity of bearing position (c) | 6400 N/µm |
| Screw tightening torque (M) | 34 Nm |
| Maksimum Çalışma Sıcaklığı (T) | 120 °C |
| Minimum Çalışma Sıcaklığı (T) | -30 °C |
| Threaded extraction hole (G) | M12 |
| Tilting rigidity of rolling element set (c) | 201000 Nm/mrad |
| Tilting rigidity of bearing position (c) | 120600 Nm/mrad |
| Width of outer ring (C) | 18 mm |
Henüz inceleme yapılmadı.
Çeviri
İncelemeler
Henüz inceleme yapılmadı.