Açıklama

YRTCMI180-XL Teknik Özellikleri

Orijinal Schaeffler (FAG/INA) üretimi YRTCMI180-XL kodlu Axial/radial roller beaBilezik, endüstriyel uygulamalarda güvenilir performans ve uzun ömür sunar. Teknik detaylar ve ölçüler aşağıdaki tabloda yer almaktadır.

YRTCMI180-XL Axial/radial roller beaBilezik Teknik Özellikleri Tablosu Özellik Değer Ağırlık 8.2 kg Axial rigidity of rolling element set (c) 13500 N/µm Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. (t) 4 µm Axial rigidity of bearing position (c) 9400 N/µm Dinamik Yük Sayısı (Eksenel) (C) 134000 N Dinamik Yük Sayısı (Radyal) (C) 100000 N Statik Yük Sayısı (Radyal) (C) 200000 N Statik Yük Sayısı (Eksenel) (C) 730000 N Bearing friction torque at 5 1/min (M) 5 Nm İç Çap (d) 180 mm Bore diameter lower tolerance -0.013 mm Bore diameter upper tolerance 0 mm Counterbore depth of fixing holes (a) 6.2 mm Counterbore diameter of fixing holes (d) 11 mm Fixing holes diameter inner ring (d) 7 mm Fixing holes diameter outer ring (d) 7 mm Height contact face outer ring (H) 29 mm Height contact face outer ring (H) 21 mm Yükseklik (H) 50 mm Limit Hız (n) 600 1/min Maximum diameter inner ring (D) 245.1 mm Dış Çap (D) 280 mm Outside diameter lower tolerance -0.018 mm Outside diameter upper tolerance 0 mm Pitch quantity (n) 48 Pitch separation angle (t) 7.5 ° Pitch circle diameter fixing holes in inner ring (J) 194 mm Pitch circle diameter fixing holes in outer ring (J) 260 mm Quantity of fixing holes inner ring 46 Quantity of fixing holes outer ring 45 Quantity of retaining screws 2 Quantity of threaded extraction hole 3 Radial rigidity of rolling element set (c) 5300 N/µm Radial rigidity of bearing position (c) 5000 N/µm Screw tightening torque (M) 14 Nm Maksimum Çalışma Sıcaklığı (T) 120 °C Minimum Çalışma Sıcaklığı (T) -30 °C Threaded extraction hole (G) M8 Tilting rigidity of rolling element set (c) 88500 Nm/mrad Tilting rigidity of bearing position (c) 46000 Nm/mrad Width of outer ring (C) 15 mm