Açıklama

ZKLDF325 Teknik Özellikleri

Orijinal Schaeffler (FAG/INA) üretimi ZKLDF325 kodlu Axial Eğik Bilyalı Rulman, endüstriyel uygulamalarda güvenilir performans ve uzun ömür sunar. Teknik detaylar ve ölçüler aşağıdaki tabloda yer almaktadır.

ZKLDF325 Axial Eğik Bilyalı Rulman Teknik Özellikleri Tablosu Özellik Değer Ağırlık 24.8 kg Axial rigidity of rolling element set (c) 5400 N/µm Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. (t) 6 µm Axial rigidity of bearing position (c) 4000 N/µm Dinamik Yük Sayısı (Eksenel) (C) 172000 N Statik Yük Sayısı (Eksenel) (C) 1110000 N İç Çap (d) 325 mm Bore diameter lower tolerance -0.023 mm Bore diameter upper tolerance 0 mm Counterbore depth of fixing holes (a) 8.2 mm Counterbore diameter of fixing holes (d) 15 mm Fatigue load limit, axial (C) 26000 N Fixing holes diameter inner ring (d) 9.3 mm Fixing holes diameter outer ring (d) 9.3 mm Flange diameter (D) 450 mm Flange diameter lower tolerance -0.023 mm Flange diameter upper tolerance 0 mm Height contact face outerring H1 lower tolerance -0.2 mm Height contact face outer ring (H) 40 mm Height contact face outerring H1 upper tolerance 0.2 mm Yükseklik (H) 60 mm Limit Hız (n) 2000 1/min Outside diameter D1 (D) 415 mm Outside diameter D3 (D) 413 mm Pitch quantity (n) 36 Pitch separation angle (t) 10 ° Pitch circle diameter fixing holes in inner ring (J) 342 mm Pitch circle diameter fixing holes in outer ring (J) 430 mm Quantity of fixing holes inner ring 34 Quantity of fixing holes outer ring 33 Quantity of retaining screws 2 Quantity of threaded extraction hole 3 Radial rigidity of rolling element set (c) 800 N/µm Radial rigidity of bearing position (c) 800 N/µm İç Bilezik Fatura Çapı (D) 380 mm Screw tightening torque (M) 34 Nm Maksimum Çalışma Sıcaklığı (T) 120 °C Minimum Çalışma Sıcaklığı (T) -30 °C Threaded extraction hole (G) M12 Tilting rigidity of rolling element set (c) 90000 Nm/mrad Tilting rigidity of bearing position (c) 60000 Nm/mrad