Açıklama

YRT50 Teknik Özellikleri

Orijinal Schaeffler (FAG/INA) üretimi YRT50 kodlu Axial/radial roller beaBilezik, endüstriyel uygulamalarda güvenilir performans ve uzun ömür sunar. Teknik detaylar ve ölçüler aşağıdaki tabloda yer almaktadır.

YRT50 Axial/radial roller beaBilezik Teknik Özellikleri Tablosu Özellik Değer Ağırlık 1.61 kg Axial rigidity of rolling element set (c) 6200 N/µm Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. (t) 2 µm Axial rigidity of bearing position (c) 1300 N/µm Dinamik Yük Sayısı (Eksenel) (C) 56000 N Dinamik Yük Sayısı (Radyal) (C) 28500 N Statik Yük Sayısı (Radyal) (C) 49500 N Statik Yük Sayısı (Eksenel) (C) 280000 N Bearing friction torque at 5 1/min (M) 2.5 Nm İç Çap (d) 50 mm Bore diameter lower tolerance -0.008 mm Bore diameter upper tolerance 0 mm Fixing holes diameter inner ring (d) 5.6 mm Fixing holes diameter outer ring (d) 5.6 mm Height contact face outerring H1 lower tolerance -0.025 mm Height contact face outer ring (H) 20 mm Height contact face outerring H1 upper tolerance 0.025 mm Height contact face outerring H2 lower tolerance -0.02 mm Height contact face outer ring (H) 10 mm Height contact face outerring H2 upper tolerance 0.02 mm Yükseklik (H) 30 mm Limit Hız (n) 440 1/min Maximum diameter inner ring (D) 105 mm Dış Çap (D) 126 mm Outside diameter lower tolerance -0.011 mm Outside diameter upper tolerance 0 mm Pitch quantity (n) 12 Pitch separation angle (t) 30 ° Pitch circle diameter fixing holes in inner ring (J) 63 mm Pitch circle diameter fixing holes in outer ring (J) 116 mm Quantity of fixing holes inner ring 10 Quantity of fixing holes outer ring 12 Quantity of retaining screws 2 Radial rigidity of rolling element set (c) 1500 N/µm Radial rigidity of bearing position (c) 1100 N/µm Screw tightening torque (M) 8.5 Nm Maksimum Çalışma Sıcaklığı (T) 120 °C Minimum Çalışma Sıcaklığı (T) -30 °C Tilting rigidity of rolling element set (c) 5900 Nm/mrad Tilting rigidity of bearing position (c) 1250 Nm/mrad Width of outer ring (C) 10 mm