Açıklama

YRTCM395-XL Teknik Özellikleri

Orijinal Schaeffler (FAG/INA) üretimi YRTCM395-XL kodlu Axial/radial roller beaBilezik, endüstriyel uygulamalarda güvenilir performans ve uzun ömür sunar. Teknik detaylar ve ölçüler aşağıdaki tabloda yer almaktadır.

YRTCM395-XL Axial/radial roller beaBilezik Teknik Özellikleri Tablosu Özellik Değer Ağırlık 32.055 kg Axial rigidity of rolling element set (c) 37000 N/µm Axial and radial runout, measurement standard; Measured on mounted bearing, with ideal adjacent construction. (t) 6 µm Axial rigidity of bearing position (c) 19800 N/µm Dinamik Yük Sayısı (Eksenel) (C) 265000 N Dinamik Yük Sayısı (Radyal) (C) 200000 N Statik Yük Sayısı (Radyal) (C) 640000 N Statik Yük Sayısı (Eksenel) (C) 2190000 N Bearing friction torque at 5 1/min (M) 19 Nm İç Çap (d) 395 mm Bore diameter lower tolerance -0.023 mm Bore diameter upper tolerance 0 mm Counterbore depth of fixing holes (a) 8.2 mm Counterbore diameter of fixing holes (d) 15 mm Fixing holes diameter inner ring (d) 9.3 mm Fixing holes diameter outer ring (d) 9.3 mm Height contact face outerring H1 lower tolerance -0.05 mm Height contact face outer ring (H) 42.5 mm Height contact face outerring H1 upper tolerance 0.05 mm Height contact face outerring H2 lower tolerance -0.025 mm Height contact face outer ring (H) 22.5 mm Height contact face outerring H2 upper tolerance 0.025 mm Yükseklik (H) 65 mm Height shaft washer (H) 17.5 mm Limit Hız (n) 200 1/min Maximum diameter inner ring (D) 487.7 mm Dış Çap (D) 525 mm Outside diameter lower tolerance -0.028 mm Outside diameter upper tolerance 0 mm Pitch quantity (n) 48 Pitch separation angle (t) 7.5 ° Pitch circle diameter fixing holes in inner ring (J) 415 mm Pitch circle diameter fixing holes in outer ring (J) 505 mm Quantity of fixing holes inner ring 46 Quantity of fixing holes outer ring 45 Quantity of retaining screws 2 Quantity of threaded extraction hole 3 Radial rigidity of rolling element set (c) 13000 N/µm Radial rigidity of bearing position (c) 8100 N/µm Diameter of dimensional scale on shaft locating washer (D) 485.02 mm Screw tightening torque (M) 34 Nm Maksimum Çalışma Sıcaklığı (T) 120 °C Minimum Çalışma Sıcaklığı (T) -30 °C Threaded extraction hole (G) M12 Tilting rigidity of rolling element set (c) 1002000 Nm/mrad Tilting rigidity of bearing position (c) 448000 Nm/mrad Width of outer ring (C) 20 mm